NW-990MDca

Details

  Details

 ^{Pictures, dimensions,table data and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data.}

* Look-ahead does just what its name implies; it looks ahead of the data it needs to mill at any given moment to verify that the CNC will be able to handle the demands the path will put on the machine. If the data check reveals that there may be a problem, feed rates for intermediate points along the contour are added, adjusting the feed rate downward to the maximum feed rate that will still yield an accurate surface.

 Features

     PRODUCT FEATURES

• Display: 800 * 600px 8 inch real color LCD
• CPU: ARM(32bits)+DSP+FPGA
• Dimension(L*W*H):  325*250*125
• Mounting hole dimension: 298*225
• Input / Output pins : 24 input / 24 output (40/24 in / out)
• Adapt bus modbus technology, ARM + DSP + FPGA technology
• USB and RS232 port, DNC function of USB
• Network remote technology and could diagnose the system online
• User's storage is 128M and could be infinite number of program
• Abosolute type of motor (17bits multi circle) controlling technology
• The most moving rapid speed is 300m/min, processing speed reaches 0.01 ~ 30m/min
• The cycle of interpolation is 2ms, controlling accuracy is 0.1um
• All closed-loop with grating ruler control and the accuracy is <2um
• Preread the short line program to satisfy with high speed engraving and cutting
• Intelligent Man-Machine dialog interface

DSP Technology	USB Port	ARM Processor	FPGA Real Time processing	MODBUS Communication

Number of control axes

• Number of control axes: 2,3 or 4 axes (X Z, XYZ or XYZA)
• Number of linkage axes: 2,3 or 4 axes
• Number of PLC control axes: 2,3 or 4 axes

Feeding axes function

• Minimum command unit: 0.001mm
• Position command range: +/- 99999.999
• Max speed: 30 m/minFeeding speed:0.001-15m/min 
• G00 rapid override: Total 8 levels: 0~150%,real-time adjusting
• Feeding override: Total 16 levels: 0~150%,real-time adjusting
• Override: Total 16 levels: 5%~150%,real-time adjusting
• Interpolation mode: Interpolation of linear ,arc ,thread and rigid tapping
• Auto chamfering

Thread

• Acceleration and deceleration funciton
• Common thread(follow the spindle) / Rigid thread
• Single-headed/Multi thread of straight ,taper and therminal suface in metric system/inch system,wqual and variable pitch thread
• Thread retractin length ,angle and speed characteristics can be set
• Thread pitch:0.1~1000.000mm or 0.1~99 tooth/inch
• Rapid traverse: linear type or S type
• The starting speed,finishing speed and time of acceleration and deceleration are set by parameter

Spindle function

• Analog voltage 0~10V output in two channels ,support two-spindle control
• Spindle encoder feedback in one channel,the resolution of spindle encoder can be set
• Spindle speed: It is set by speed parameter,max spindle speed also coressponding to 10V
• Spindle override: Total 16 levels: 5%~150%,real-time adjusting
• Spindle constant surface speed control
• Ragid tapping

Tool Function

• Tool length compensation
• tool nose radius compensation (C type)
• Tool wearing compensation
• Method of setting tools: Tool-setting in fixed position ,trial cutting tool -setting,return to reference point,auto tool setting
• Tool offset exexuting mode: Rewriting coordinate mode,tool traverse mode

Precision compensation

• Backlash compensation/Pitch error compensation in memory type

PLC function

• The refresh cycle: 8ms
• PLC program download by USB interface
• PLC program can be customized edit
• Basic I/Os : 40*24 I/Os , can be edit freely

Man-machine interface

• 8.4'' large screen real-color LCD , the resolution if 480 000
• Display in Chinese or English
• Display in two-dimensional tool path
• Real-time clock
• Operation management
• Operate mode: Edit, Auto, Manual, MDI, mechanical zero return, MPG/single step, program zero-return
• Operation authority of multiple-level management
• Alarm record

Edit program

• Program capacity: 32M
• Editing function: program/block/characters research ,rewriting and deleting
• Program format: ISO code,support Macro command programming,programming of relative coordinate ,absolute coordinate and hybrid coordinate
• Calling program: Support macro program ,subprogram

Community function

• RS232: Files of part program can be transmitted
• USB: File operationand file directly processing in flash disk,support PLC programs,flash disk of software upgrade.

Safety function

• Emergency stop
• Hardware travel limit
• Software travel limit
• Data restoring and recovering
• User-defined alarm hint

System operation condition 

• Power supplying
  AC 220V(+10/-15), Frequency 50Hz±2%. power:≤ 200W. Note: it must use isolation transform to supply power first input:380V
• Climate condition /operation condition: temperature 0-45 degree,relative moisture 40-80%. storage & transportation condition:temperature -40 ~ 55degree,relative moisture <93%(40degree). atmosphere pressure:86-106kpa.
• operation environment : No excessive flour dust, no acid, no alkali gas and explosive gas, no strong electromagnetic interference.

  ATC for Umbrella and linear type tool magazine

ATC Setting interface for Linear tool magazine	ATC Setting interface for Umbrella tool magazine

  Interface