ER Цанги LC

details

  Details

ER Collet Dimension Table
ER Collet Size	d H7 Capacity [mm]	D	D1	D2	L	L1	L2	L3	Price [without VAT]
ER11	1.0 ~ 7.0	11	11.5	9.5	18.0	3.8	2.5	2.0	1.25 €
ER16	1.0 ~ 10.0	16	17	13.8	27.5	6.26	4.0	2.7	1.35 €
ER20	1.0 ~ 13.0	20	21	17.4	31.5	6.36	4.8	2.8	1.55 €
ER25	1.0 ~ 16.0	25	26	22.0	34.0	6.66	5.0	3.1	2.35 €
ER32	2.0 ~ 20.0	32	33	29.2	40.0	7.16	5.5	3.6	3.35 €
ER40	3.0 ~ 26.0	40	41	36.2	46.0	7.66	7.0	4.1	4.20 €
All dimensions are in milimeters

 ^{Pictures, dimensions,table data and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data.}

  Install ER Collet

1. Put collet into nut, turn the clamp spring lightly. When eccentric part of nut fits into clamp spring, push the spring in arrow pointed direction.
2. Install clamp spring and nut together onto collet body or main shaft of machine. Clean and fit the shaft of the tool into clamp hole and press tight the fixing nut with wrench until the lathe tool is fully fixed.
3. While changing cutting tool, screw out nut and collet with wrench. Then dismount cutting tool and push out clamp spring in arrow pointed direction. Then you can change the suitable clamp spring.

Note: To avoid damage of clamp spring, please don’t fix nut before installing cutting tool.