Фото клетка сензор GS1

High Quality Gate Photocell Sensor

Compatible with all Giant gate openers (swing gates and slide gates) 12/24 DC or AC voltage. Stylish design helps to deflect rain and snow. Can also be used with garage doors, alert systems and alarms. Automatic high quality infrared photocell sensor for garage gate openers are mainly used in security systems, roller doors, shutters, sliding doors, barriers and household equipment and garage door opener.

When it comes to keeping your automated gate safe Giant infrared sensor is the way to go. Have peace of mind knowing your family and vehicle will be protected from the occasional mishap that can sometimes occur. One or two carefully placed sensors can keep your automatic gate opener from closing accidentally on a vehicle or more importantly on a person. Having a wired sensor is more reliable and you don't need to worry about changing batteries. The Giant infrared sensor can be powered with 12/24 dc or ac voltage which can be conveniently powered off any Giant low voltage automatic gate opener. With over a 40-foot range, this sensor can be used on virtually any residential or commercial driveway.

The photocells should be installed at height of more than 20cm above the ground. And the distance between transmitter and receiver should be more than 50cm.
Working range 30-40m.

Technical data of photocell sensors:

• Power Supply: AC/DC 12-24V
• Working Current: Transmitter: 10mA; Receiver: 20mA
• Infrared Wavelength: 890nm
• Operating Distance: ≥40M
• Receiver Relay Contact Output: Max. 1A at 24V DC
• Angle of Infrared Beam Can Be Adjusted: 0~90°
• N.C. Or N.O. Can Be Set Through Jumper on Receiver Photocell
• Protection Rating: IP45
• Operating Temperature: -20℃~+70