BS6500 Diaphragm Pump

 Features:

• Use a water pipe with a specification of 10*14mm or an inner diameter of 10mm.
• In order to prevent blockage due to unintentional inhalation of contaminants, the water pipe at the suction end must be utilized with a filter. If not, the pump head will need to be disassembled and cleaned.
• Because the open copper coil motor component is not waterproof, the water pump cannot be submerged in water or exposed to rain.
• Do not use 220V AC power , it is intended only for DC power 4VDC-14VDC
• if you used some other type of chemicals, then at the end, when you finish, you must let the water rinse the pump for at least one minute.
• It is forbidden to pump flammable and explosive liquids, and it is not allowed to pump liquids containing impurities.
• The water pump is suitable for intermittent operation, and there is no time limit for intermittent operation. It is a product that can be used continuously. It can work continuously for 24 hours as a circulation pump.

 Specifications:

• Material: ABS
• Maximum flow rate: 8L/min
• Operating voltage: Nominal 9VDC-14VDC (this pump can work from 4VDC to 16VDC) Voltage is proportional to flow rate
• Current consumption: Max 5.0 A
• Maximum pressure: 6.0 Bar

Package include:

• BS6500 Diaphragm Water Pump
• Water filter
• 2 x stainless steel pipe buckles

1. Pressure adjustment (it has already been adjusted at the factory, the user need not make any adjustments.) 
2. Two stainless steel pipe buckles
3. Flow direction
4. Durable stainless steel screws
5. Anti-vibration rubber mounts