
Details
System function | G - Code (Only the basic codes are shown, for more G-Codes details see PDF manuals for NW-990 models or G-Code tab) |
||
The smallest resolution: | 0.001mm | Straight line interpolation: | G01 |
The max axis value: | ±99999.999mm | Arc interpolation: | G02/G03 |
The highest speed G00: | 30m/min | Thread cut: | G32 |
Feed speed G01: | 0.001~15m/min | Absolute and incremental Positioning: | G90 |
Continuous manual: | One axis or two axis at the same time | Feed per minute: | G94 |
Line interpolation: | Straight line, arc, screw thread interpolation | Origin start point: | G92 |
Cutter compensation: | length of the compensation、nose of tool compensation | Fixed cycle of tapping: | G93 |
Cutter compensation input: | Try to cut measuring input mode | Fixed cycle, multiple repetitive cycle, for roughing: | G71 |
Spindle function: | Gear、Double analog control,Rigid tapping | Canned Cycle Facing: | G72 |
Handwheel function: | Panel、handheld | High-speed Peck Drilling: | G73 |
Handwheel processing: | The handwheel processing function | Peck drilling cycle for turning: | G74 |
Screen protection: | The screen protection function | Peck grooving cycle for turning: | G75 |
Tool rest function: | Row tool rest、Electric tool post 99 knife | Threading Canned Cycle: | G76 |
Communication function: | RS232、Usb interface | Program cycle order: | G22、G800 |
Compensation function: | Tool compensation、Space compensation、 Screw pitch compensation、Radius compensation | Local coordinate system: | G52 |
Units / Coordinate system: | Metric/Imperial、Relative/Absolute | Feed until skip function: | G31、G311 |
Limit function: | Soft limit、Hard limit | Polar Coordinate: | G15、G16 |
Thread function: | Metric/Imperial、Straight thread、taper thread and so on by G-Code | Metrical/Imperial programme: | G20、G21 |
* Preread function (Look-ahead): | Preread 10000 short straight lines | Set coordinate、offset | G184、G185 |
Password protection | Multilevel password protection | Workpiece coordiante system WCS: | G54~G59 |
Input/output: | I/O 24X24 | Tool radius C compensastion: | G40、G41、G42 |
PLC programme: | All open PLC design | Accurate locating/continuous path process: | G60/G64 |
Acceleration and deceleration control: | Staight line 、Index | Constant surface speed (CSS) | G96/G97 |
Number of encoder: | Arbitrary set | Feeding mode: | G98、G99 |
User macro program: | Have | Backing to start point of progarm: | G26 |
Electrical gear function: | Have | Backing to the fixed point: | G25、G61、G60 |
Application: | Lathe、special machine tools | Return to home position (reference point) | G28 |
Dwell | G04 | ||
Auxiliary function: | S、M、T |
Pictures, dimensions,table data and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data.
* Look-ahead does just what its name implies; it looks ahead of the data it needs to mill at any given moment to verify that the CNC will be able to handle the demands the path will put on the machine. If the data check reveals that there may be a problem, feed rates for intermediate points along the contour are added, adjusting the feed rate downward to the maximum feed rate that will still yield an accurate surface.
Features
![]() |
PRODUCT FEATURES
![]() |
![]() |
![]() |
![]() |
![]() |
DSP Technology | USB Port | ARM Processor | FPGA Real Time processing | MODBUS Communication |
Number of control axes
Feeding axes function
Thread
Spindle function
Tool Function
Precision compensation
PLC function
Man-machine interface
Edit program
Community function
Safety function
System operation condition
ATC for Umbrella and linear type tool magazine
![]() |
![]() |
ATC Setting interface for Linear tool magazine | ATC Setting interface for Umbrella tool magazine |
Interface
![]() |
![]() |
![]() |
![]() |